Operation process of the intelligent solder paste management cabinet:

     Model Management: After the solder paste is received, create the model of the solder paste. The content includes the model, the number of pastes for temperature recovery, the temperature recovery time, the parameters of the solder paste bottle body, the mixing time, the mixing speed, and the standing time.

    Solder Paste Warehousing: After the solder paste is scanned, it enters the refrigeration stage.

    Start Temperature Recovery: According to different operation modes (Cycle Mode: Based on the "number of pastes for temperature recovery" set in advance in the model management, ensure that there is always enough solder paste available for collection in the temperature recovery area; Appointment Mode: Carry out the temperature recovery process in advance according to the estimated time of using the solder paste on the production line), carry out the corresponding temperature recovery treatment.

    Start Mixing: After the temperature recovery of the solder paste is completed, start the mixing process.

      End Mixing: After the mixing of the solder paste is completed, it enters the waiting area for collection.

     Solder Paste Outbound:The solder paste leaves the solder paste cabinet, uploads the barcode of the solder paste, and prints the outbound record label.